We have been manufacturing carpet sets for over 20 years and use materials specially designed for automotive use, which we process with CNC cutting machines for an exact fit. In this respect, you can expect the best quality.
Based on our many years of experience, please allow us to give you a few hints:
When comparing with your own carpets, considerable deviations may occur, especially as these are often deformed or shrunk due to age and may no longer be the original carpet.
Edges that are hidden after installation are not edged, as they are then less noticeable, even if some original carpets were edged all around.
Almost all car manufacturers have changed the design of the carpet more or less in the course of the production period, despite the fact that the floor assembly has remained the same.
For this reason, we have standardised the design, but this is based on the last side edge, so that the originality is preserved.
The different thicknesses of insulation materials used can affect the fit of the carpets. We have made every effort to design the carpets in detail so that they are compatible with both thicker and thinner insulation between the carpet and the floor panel.
We generally manufacture the carpets in such way that they fit your vehicle in the best possible way under all conditions.
A certain amount of craftsmanship is unavoidable during the installation of the carpets into the vehicle. For this purpose, they have to be cut in some areas if necessary or adjusted by padding with felt or they have to be brought into the correct shape and position by heating and mechanical deformation.
Depending on the vehicle, we need approx. 8 hours for a complete carpet fitting, plus the time for preparation, cleaning and, if necessary, processing of the floor assembly.
We recommend that you contact a professional car restoration specialist for the installation of your carpets.